RENOPLAN SYSTEM 2

How can a thin screed that is flat and ready for covering be quickly and economically installed? With UZIN NC 157.

With UZIN NC 157 deep fill a thin screed with a thickness between 3 and 50 mm can be installed onto either concrete and cement screeds or onto sound reconstituted stone flooring. Once dry, it provides a flat, absorbent and sound substrate onto which all types of floor covering (resilient and textile coverings, natural stone or ceramic tiles) can be installed. The major advantages of UZIN NC 157 are that it can easily be pump-applied, it has excellent flow properties and is time-saving due to its rapid setting and drying performance. For pump application we recommend the use of continuous-feed mixer-pumps.

<p>Abrade the substrate with a WOLFF sanding-machine to clean the surface of any contamination. Then vacuum with a high-performance industrial vacuum cleaner to remove all dirt.</p>

Abrade the substrate with a WOLFF sanding-machine to clean the surface of any contamination. Then...

<p>Before the surface can be primed with 2-component epoxy sealerprimer UZIN PE 460, the components must be homogeneously mixed using a drill with mixer attachment. Do not forget to wear protective clothing! Decant the mixture into an oval bucket and mix thoroughly once again.</p>

Before the surface can be primed with 2-component epoxy sealerprimer UZIN PE 460, the components...

<p>Prime the surface with the 2-component mix using the UZIN nylon fibre roller (UZIN Primer Rollers).</p>

Prime the surface with the 2-component mix using the UZIN nylon fibre roller (UZIN Primer Rollers).

<p>Fully grit the surface with UZIN Quartz Sand 0.8. Generously sprinkle the quartz sand to fully cover the still wet resin. After setting, sweep and vacuum to remove the excess, loose and weakly bonded sand.</p>

Fully grit the surface with UZIN Quartz Sand 0.8. Generously sprinkle the quartz sand to fully...

<p>Fit suitable UZIN expansion strips to all vertical structures such as walls, supports, pipe-work, platforms, door-frames, etc. This avoids any direct sound transfer and any rigid connection between the screed and other structures.</p>

Fit suitable UZIN expansion strips to all vertical structures such as walls, supports, pipe-work,...

<p>Set the mixer-pump for the correct consistency and the required water quantity. Load the material through the fill-hopper. </p>

Set the mixer-pump for the correct consistency and the required water quantity. Load the material...

<p>At the same time using the delivery hose, allow the self-levelling mix to flow onto the prepared substrate to the desired thickness. UZIN Spike Shoes enable walking through the wet mortar. (Recommendation: using the UZIN Spike Roller contributes to an improvement in the quality of the surface finish).
On surfaces prepared in this way, any floor covering can be installed.</p>

At the same time using the delivery hose, allow the self-levelling mix to flow onto the prepared...