You are here:

 

Merkliste (0)

 
 
 

RENOPLAN SYSTEM 9

How can textile and resilient floor coverings be installed in new builds to allow future removal without residues? With Sigan 1.

Sigan 1 allows textile and resilient floor coverings to be replaced quickly and simply when refurbishment is required. Swift and flexible changes of floor coverings is becoming increasingly important especially in newly constructed rental flats, offices or shops. Sigan 1 can provide years of problem free protection for the substrate whilst the floor covering can be replaced quickly and cleanly when the usage changes or new tenants move in. Only the switchTec adhesive technology from UZIN offers this advantage, because Sigan 1 is guaranteed to leave no residues or damage when the floor covering is removed.

<p>The substrate must be sound, flat, permanently dry, free of cracks, clean and free of materials that could impair adhesion.</p>

The substrate must be sound, flat, permanently dry, free of cracks, clean and free of materials...

<p>Shake the Planus container well and pour into a clean bucket without diluting it. Apply a thin and even coat of primer with a UZIN foam roller. Provide ventilation and allow to dry for at least 2 hours.</p>

Shake the Planus container well and pour into a clean bucket without diluting it. Apply a thin and...

<p>Now perform a trial. Rub down Sigan 1 onto the substrate and check whether Sigan 1 remains bonded to the substrate.</p>

Now perform a trial. Rub down Sigan 1 onto the substrate and check whether Sigan 1 remains bonded...

<p>Install Sigan 1 tape along walls and doors. This provides increased adhesive strength in the edge areas.</p>

Install Sigan 1 tape along walls and doors. This provides increased adhesive strength in the edge...

<p>Install the Sigan 1 in the running direction of the new floor covering preferably roll out overlapping, rub down well and then cut back to the joint.</p>

Install the Sigan 1 in the running direction of the new floor covering preferably roll...

<p>Fold back half of the floor covering. Pull the protective paper away from the Sigan 1.</p>

Fold back half of the floor covering. Pull the protective paper away from the Sigan 1.

<p>Install the floor covering onto the Sigan 1 and roll out.</p>

Install the floor covering onto the Sigan 1 and roll out.

<p>The floor covering can be walked on and used immediately. The floor covering can be removed years later without leaving residues.</p>

The floor covering can be walked on and used immediately. The floor covering can be removed years...

 
 
to top back
recommend page print page